Rigol DM3058 - Commands Introduction

RIGOL
Programming Guide for DM3058
1-5
Commands Introduction
To meet the needs from different users, DM3058 not only provide RIGOL commands,
but also provide another two commands that are compatible with the related
products.
 RIGOL DM3058 commands
 The commands compatible with Agilent
 The commands compatible with Fluke
Send CMDSET command to switch the commands type. For the usage please see the
follows:
Command Format:
CMDSET□{RIGOL|AGILENT|FULUKE}
CMDSET？
Function:
The command sets and queries the type of commands .
 The first command parameters could be RIGOL，AGILENT and FLUKE, and which
separately means switch to corresponding commands.
 The second command queries the current commands and returns the name of
commands.
Remarks:
If you don‘t want to set the type of commands via this command when starting
machine, the default will be RIGOL.