Rigol DM3058

RIGOL
Programming Guide for DM3058
5-45
Sense Commands
The commands are used to set parameters of measuring functions, such as NULL
value, range, accuracy, interval time, and enable state of measuring function.
Which mainly include:
 [SENSe:]FUNCtion[:ON]
 [SENSe:]CURRent:AC:NULL[:STATe]
 [SENSe:]CURRent:AC:NULL:VALue
 [SENSe:]CURRent:AC:PEAK:STATe
 [SENSe:]CURRent:AC:RANGe:AUTO
 [SENSe:]CURRent:AC:RANGe[:UPPer]
 [SENSe:]CURRent[:DC]:APERture
 [SENSe:]CURRent[:DC]:APERture:ENABled
 [SENSe:]CURRent[:DC]:NPLC
 [SENSe:]CURRent[:DC]:NULL[:STATe]
 [SENSe:]CURRent[:DC]:NULL:VALue
 [SENSe:]CURRent[:DC]:PEAK:STATe
 [SENSe:]CURRent[:DC]:RANGe:AUTO
 [SENSe:]CURRent[:DC]:RANGe[:UPPer]
 [SENSe:]CURRent[:DC]:RESolution
 [SENSe:]CURRent[:DC]:ZERO:AUTO
 [SENSe:]VOLTage:AC:NULL[:STATe]
 [SENSe:]VOLTage:AC:NULL:VALue
 [SENSe:]VOLTage:AC:PEAK:STATe
 [SENSe:]VOLTage:AC:RANGe:AUTO
 [SENSe:]VOLTage:AC:RANGe[:UPPer]
 [SENSe:]VOLTage[:DC]:APERture
 [SENSe:]VOLTage[:DC]:APERture:ENABled
 [SENSe:]VOLTage[:DC]:IMPedance:AUTO
 [SENSe:]VOLTage[:DC]:NPLC
 [SENSe:]VOLTage[:DC]:NULL[:STATe]
 [SENSe:]VOLTage[:DC]:NULL:VALue