Rigol DM3058

RIGOL
Programming Guide for DM3058
5-22
Fetch Commands
The commands are used to read the data from output buffer of multimeter.
Which mainly include:
 FETCh?
 FETCh:CURRent:AC:PTPeak?
 FETCh:CURRent[:DC]:PEAK:MAXimum?
 FETCh:CURRent[:DC]:PEAK:MINimum?
 FETCh:CURRent[:DC]:PTPeak?
 FETCh:VOLTage:AC:PTPeak?
 FETCh:VOLTage[:DC]:PEAK:MAXimum?
 FETCh:VOLTage[:DC]:PEAK:MINimum?
 FETCh:VOLTage[:DC]:PTPeak?