Rigol DM3058 - Page 137

RIGOL
Programming Guide for DM3058
5-21
The command queries the number of data saved in non-volatile memory.
Return Format:
The query returns the number of data saved in non-volatile memory.
5. DATA:REMove?
Command Format:
DATA:REMove?□<num_readings>
Function:
The command reads and removes the specified number of data from memory.
Parameters:
Name
Type
Range of Values
Default
<num_readings>
Discrete
The specified number,
not beyond ―points‖.
Required
parameter
Explanations:
<num_readings> must be set in the command, and can‘t greater than the return
value of DATA:POINts?□NVMEM, or be a error.
Return Format:
The query returns the specified number of data in memory.