Rigol DM3058 Programming Guide

RIGOL
Programming Guide for DM3058
6-16
Compatible Fluke Commands
The following table lists the Fluke commands supported by RIGOL DM3058 digital
multimeter. Before using the commands, you should send the CMDSET command
(refer to Page 1-5): CMDSET□FLUKE to select Agilent command system.
Compatible Fluke Commands
AAC
AAC2
ADC
ADC2
AUTO
AUTO?
CLR2
COMP
COMP?
COMPCLR
COMPHI
COMPLO
CONT
DB
DBCLR
DBPOWER
DBREF?
DBREF
DIODE
FIXED
FREQ
FREQ2
FUNC1?
FUNC2?
HOLD
HOLDCLR
HOLDTHRESH?
HOLDTHRESH

Rigol DM3058 Specifications

General

Diode test	Yes
Product type	Digital multimeter
Frequency range	0.02 - 1000 kHz
AC current range	0.02 - 10 A
AC voltage range	0.2 - 750 V
DC current range	0.0002 - 10 A
DC voltage range	0.2 - 1000 V
Resistance range	200 - 100000000 Ω
Capacitance range	2 - 10000000 nF
Measuring category	CAT III 300V
Basic accuracy (frequency)	0.01 + 0.003
Basic accuracy (DC current)	0.055 + 0.005
Basic accuracy (DC voltage)	0.015 + 0.003
Basic accuracy (resistance)	0.020 + 0.003
Basic accuracy (capacitance)	1 + 0.5
Display digits	5.5 digits
Display size (HxV)	256 x 64 mm
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C

Weight and Dimensions

Depth	107 mm
Width	231.6 mm
Height	290.5 mm
Weight	2500 g