Rigol DM3058

RIGOL
Programming Guide for DM3058
5-90
System Commands
The commands are used to set communication ports and their parameters.
Which mainly include:
 SYStem:BEEPer:STATe
 SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
 SYSTem:COMMunicate:LAN:BSTatus?
 SYSTem:COMMunicate:LAN:CONTrol?
 SYSTem:COMMunicate:LAN:DDNS
 SYSTem:COMMunicate:LAN:DHCP
 SYSTem:COMMunicate:LAN:DNS
 SYSTem:COMMunicate:LAN:DOMain
 SYSTem:COMMunicate:LAN:GATEway
 SYSTem:COMMunicate:LAN:HOSTname
 SYSTem:COMMunicate:LAN:IPADdress
 SYSTem:COMMunicate:LAN:MAC?
 SYSTem:COMMunicate:LAN:SMASk
 SYSTem:VERSion?