Rigol DM3058

RIGOL
Programming Guide for DM3058
5-91
1. SYStem:BEEPer:STATe
Command Format:
SYStem:BEEPer:STATe□{ON|OFF}
SYStem:BEEPer:STATe?
Function:
The command sets or queries the switch state of beeper.
Explanations:
SYStem:BEEPer:STATe□{ON|OFF}: Turn beeper on or off.
SYStem:BEEPer:STATe?: Query the switch state of beeper.
Return Format:
The query returns the switch state of beeper.
2. SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
Command Format:
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess□{<address>}
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?
Function:
The command sets or queries the GPIB address.
Parameters:
Name
Type
Range of Values
Default
<address>
Discrete
0~30
7
Explanations:
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess □ {<address>}: Set the GPIB
address.
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?: Query the GPIB address.
Return Format:
The query returns the GPIB address.