Function:
The command enables the MAX adjustor mode and sets the current reading as
Maximum.
Explanation:
If the instrument has already been in this mode, the maximum will be shown
directly. In MAX mode, auto range may be forbidden.
9. MAXSET
Command Format:
MAXSET□<numeric value>
Function:
The command enables the MAX mode and sets the <numeric value> as
maximum.
Explanations:
<numeric value> could be either a signed real number or a signed real number
with index and also the parameter should be higher than last one. If the
<numeric value> exceeds the range, an execution error may be occur. Auto
range may be forbidden.
10. MIN
Command Format:
MIN
Function:
The command enables the MIN mode and set the current reading as minimum.
Explanations:
If the instrument has already been in this mode, a minimum will be shown directly.
In MIN mode, auto range may be forbidden. Auto range may be forbidden.
11. MINSET
To Next Page
Loading...
