Rigol DM3058

RIGOL
Programming Guide for DM3058
5-3
1. CALCulate:FUNCtion
Command Format:
CALCulate:FUNCtion□{NULL | DB | DBM | AVERage | LIMit}
CALCulate:FUNCtion?
Function:
The command sets or queries calculation function.
Explanations:
Firstly, send the command ―CALCulate:STATe □ {OFF | ON}‖ to enable the
calculation subsystem.
CALCulate:FUNCtion □ {NULL | DB | DBM | AVERage | LIMit}: Select the
calculation function, the default is NULL.
CALCulate:FUNCtion?: Query the current calculation function.
Table 5-1 The math operation identifiers and their meanings
Calculation Identifier
Meaning
NULL
Null operation
DB
dB operation
DBM
dBm operation
AVERAGE
Average operation
LIMIT
Limit operation
Return Format:
The query returns the calcaulation identifier: NULL, DB, DBM, AVERage or LIMit.
2. CALCulate:STATe
Command Format:
CALCulate:STATe□{OFF | ON}
CALCulate:STATe?
Function:
The command sets or queries the enable state of calculate function.
Explanations:
CALCulate:STATe□{OFF | ON}: Enable or disable calculation function.