Rigol DM3058

RIGOL
Programming Guide for DM3058
2-3
1. *IDN?
Command Format:
*IDN?
Function:
The command queries equipment ID.
Return Format:
The query returns the character string that shows the equipment ID within 35
characters at least.
2. *RST
Command Format:
*RST
Function:
The command resets the equipment state to the factory default.
3. *ESE
Command Format:
*ESE□<enable_value>
*ESE?
Function:
The command sets or queries the enable value of Event Status Register (ESR).
Explanations:
*ESE□<value>: Set the enable value of Event Status Register.
*ESE?: Query the enable value of Event Status Register.
<enable_value>: The range is from 0 to 189.
Return Format:
The query returns the enable value of ESR.