Rigol DM3058

RIGOL
Programming Guide for DM3058
5-41
1. OUTPut:TRIGger:SLOPe
Command Format:
OUTPut:TRIGger:SLOPe□{POSitive|NEGative}
OUTPut:TRIGger:SLOPe?
Function:
The command sets or queries the trigger mode for ouput signal.
Explanations:
OUTPut:TRIGger:SLOPe□{POSitive|NEGative}: Set the trigger mode for ouput
signal as rising edge (POSitive) or falling edge (NEGative).
OUTPut:TRIGger:SLOPe?: Query the trigger mode for ouput signal.
Return Format:
The query returns the parameter related to trigger mode: POSitive or NEGative.