Rigol DM3058 - Chapter 2 Front Panel Operation

RIGOL
Programming Guide for DM3058
2-9
1. [:]status:operation:condition?
Command Format:
[:]status:operation:condition?
Function:
The command queries the state value of Condition Register from Operation
Status Register.
Return Format:
The query returns the state value of Condition Register from Operation Status
Register.
2. [:]status:operation:enable
Command Format:
[:]status:operation:enable□<enable_value>
[:]status:operation:enable?
Function:
The command sets or queries the value of Enable Register from Operation Status
Register.
Explanation:
[:]status:operation:enable□<enable_value>: Set the value of Enable Register
from Operation Status Register.
<enable_value>: The range is from 0 to 1841.
[:]status:operation:enable?: Query the value of Enable Register from Operation
Status Register.
Return Format:
The query returns the value of Enable Register from Operation Status Register.
3. [:]status:operation[:event]?
Command Format:
[:]status:operation[:event]?