Rigol DM3058 - Page 40

RIGOL
Programming Guide for DM3058
3-14
Table 3-2).
11. :measure:current:DC?
Command Format:
:measure:current:DC?
Function:
The command queries DC current.
Explanations:
This command is invalide for dual display
Return Format；
The query returns the DC current in the form of 9.674418e-05, and unit is A.
12. :measure:current:DC
Command Format:
:measure:current:DC□{<range>|MIN|MAX|DEF}
Function:
The command sets the measuring range of DC current and resolution.
Parameters:
Name
Type
Range of Value
Default
< range >
discrete
{0|1|2|3|4|5 }
0
Explanations:
To set the measuring range of DC current and the resolution at the same time.
The measure mode will be changed into manual when setting range.
The table 3-3 indicates the current ranges and the resolutions.