6. :system:format:decimal
Command Format:
:system:format:decimal?
:system:format:decimal□{COMMA | DOT}
Function:
The command queries and sets the format of radix point .
Explanations:
:system:format:decimal?: Query the format of radix point .
:system:format:decimal□{COMMA | DOT}: Set the format of radix point.
―COMMA‖ means to use ―,‖ as a radix point, and at the same time the former ―,‖ is
changed into ―.‖. ―DOT‖ means to use ―.‖ as a radix point, meanwhile the former
―.‖ is changed into ―,‖.
Note: As it is easier to change the format of data separator by using this
commond, so please do it carefully.
Return Format:
The query returns the current format of radix point: COMMA or DOT.
7. :system:format:separate
Command Format:
:system:format:separate?
:system:format:separate□{ON | NONE | SPACE}
Function:
The command queries and sets the format of system data separator.
Explanations:
:system:format:separate?: Query the format of system data separator.
:system:format:separate□{ON | NONE | SPACE}: Set the format of system data
separator. ―ON‖ denotes ―,‖ represents the seperator, ―NONE‖ denotes not
displaying the spererator, and ―SPACE‖ denotes that a space represents the
separator.
To Next Page
Loading...
