Rigol DM3058

RIGOL
Programming Guide for DM3058
3-39
1. :utility:interface:LAN:dhcp
Command Format:
:utility:interface:LAN:dhcp?
:utility:interface:LAN:dhcp□{ON|OFF}
Function:
The command queries and sets the switch state of DHCP for LAN connection.
Explanations:
:utility:interface:LAN:dhcp?: Query whether the DHCP is on.
:utility:interface:LAN:dhcp□{ON|OFF}: Set the switch state of DHCP. ―ON‖
denotes DHCP is on, and ―OFF‖ denotes DHCP is off.
Return Format:
The query returns the current switch state of DHCP: ON or OFF.
2. :utility:interface:LAN:ip
Command Format:
:utility:interface:LAN:ip?
:utility:interface:LAN:ip□<string>
Function:
The command queries and sets IP address for LAN connection.
Parameters:
Name
Type
Range of Values
Default
<string>
character string
self-defined
168.254.0.238
Explanations:
:utility:interface:LAN:ip?: Query the IP address.
:utility:interface:LAN:ip□<string>: Set the IP address. The parameter <string>
is the user-defined character string.
Return Format:
The query returns the current IP address.