Command Format:
:calculate:REL:state?
:calculate:REL:state□{ON|OFF}
Function:
The command queries or sets the enable state of REL operation.
Explanations:
:calculate:REL:state?: Enable or disable REL operation.
:calculate:REL:state□{ON|OFF}: Set the enable state of REL operation.
Example:
Disable REL operation:
:calculate:statistic:state□OFF
9. :calculate:DB?
Command Format:
:calculate:DB?
Function:
The command queries dB value.
Explanations:
This command is available only when dB operation is on.
Return Format:
The query returns current dB value.
10. :calculate:DB:reference
Command Format:
:calculate:DB:reference?
:calculate:DB:reference□{<range>|MIN|MAX|DEF}
Function:
To Next Page
Loading...
