Rigol DS1204B - Page 110

RIGOL Command Systems
Programming Guide for DS1000B Series
2-98
1. :SAVERECALL:TYPE
Command Format:
:SAVERECALL:TYPE <type>
:SAVERECALL:TYPE?
Function:
The command sets the data type for storage. The <type> may be WAVeform
(waveform data) or SETups (data settings).
Returned Format:
The query returns WAVEFORMS or SETUPS.
Example:
:SAVERECALL:TYPE WAV Set the storage type as waveform data.
:SAVERECALL:TYPE? Return WAVEFORM.
2. :SAVERECALL:LOCation
Command Format:
:SAVERECALL:LOCation <location>
:SAVERECALL:LOCation?
Function:
The command sets the storage location. The <location> may be 0~9.
Returned Format:
The query returns 0 or 1 ……9.
Example:
:SAVERECALL:LOC 1 Set the storage location as the second.
:SAVERECALL:LOC? Return 1.
3. :SAVERECALL:LOAD
Command Format:
:SAVERECALL:LOAD