Rigol DS1204B Programming Guide

Command Systems RIGOL
Programming Guide for DS1000B Series
2-109
CURSor Commands
CURSor Commands are used to set cursor parameters to measure manually and
automatically and track the waveform data.
CURSor Commands include:
 :CURSor:MODE
 :CURSor:MANUal:TYPE
 :CURSor:MANUal:SOURce
 :CURSor:MANUal:CURAX
 :CURSor:MANUal:CURAY
 :CURSor:MANUal:CURBX
 :CURSor:MANUal:CURBY
 :CURSor:TRACk:SOURceA
 :CURSor:TRACk:SOURceB
 :CURSor:TRACk:CURA
 :CURSor:TRACk:CURB
We will give detailed introductions for each command in the following parts.

Rigol DS1204B Specifications

General

Brand	Rigol
Model	DS1204B
Category	Test Equipment
Language	English