Rigol DS1204B - EDGE Trigger

RIGOL Command Systems
Programming Guide for DS1000B Series
2-34
EDGE Trigger
1. :TRIGger:EDGE:SLOPe
Command Format:
:TRIGger:EDGE:SLOPe {POSitive|NEGative|ALTernation}
:TRIGger:EDGE:SLOPe?
Function:
The command sets the trigger edge as POSitive (rising edge), NEGative (falling
edge) or ALTernation (rising and falling edge).
Returned Format:
The query returns POSITIVE or NEGATIVE, ALTERNATION.
Example:
:TRIG:EDGE:SLOP POS Set the trigger edge as rise edge.
:TRIG:EDGE:SLOP? Return POSITIVE.