Rigol DS1204B Programming Guide

RIGOL Command Systems
Programming Guide for DS1000B Series
2-48
MATH Commands
MATH Commands are used to display the result of adding, subtracting, multiplying
and FFT operation for the signals from CH1, CH2, CH3 and CH4. The results can be
measured by the grid and the cursor.
MATH Commands include:
 :MATH:DISPlay
We will give detailed introductions for each command in the following parts.

Rigol DS1204B Specifications

General

Brand	Rigol
Model	DS1204B
Category	Test Equipment
Language	English