Rigol DS1204B - KEY Commands

Command Systems RIGOL
Programming Guide for DS1000B Series
2-79
KEY Commands
KEY Commands are used to control the keys and knobs on the operation panel of
DS1000B.
KEY Commands include:
 :KEY:LOCK  :KEY:CH1_VOLT_INC
 :KEY:STORage  :KEY:CH1_VOLT_DEC
 :KEY:UTILity  :KEY:CH1_VOLT_Z
 :KEY:MEASure  :KEY:CH1_POS_INC
 :KEY:CURSor  :KEY:CH1_POS_DEC
 :KEY:ACQuire  :KEY:CH1_POS_Z
 :KEY:DISPlay  :KEY:CH2_VOLT_INC
 :KEY:HELP  :KEY:CH2_VOLT_DEC
 :KEY:QUICKMEASure  :KEY:CH2_VOLT_Z
 :KEY:QUICKPRINt  :KEY:CH2_POS_INC
 :KEY:AUTO  :KEY:CH2_POS_DEC
 :KEY:RUN  :KEY:CH2_POS_Z
 :KEY:SINGLe  :KEY:CH3_VOLT_INC
 :KEY:MNUTIME  :KEY:CH3_VOLT_DEC
 :KEY:MNUoff  :KEY:CH3_VOLT_Z
 :KEY:F1  :KEY:CH3_POS_INC
 :KEY:F2  :KEY:CH3_POS_DEC
 :KEY:F3  :KEY:CH3_POS_Z
 :KEY:F4  :KEY:CH4_VOLT_INC
 :KEY:F5  :KEY:CH4_VOLT_DEC
 :KEY:CH1  :KEY:CH4_VLOT_Z
 :KEY:CH2  :KEY:CH4_POS_INC
 :KEY:CH3  :KEY:CH4_POS_DEC
 :KEY:CH4  :KEY:CH4_POS_Z
 :KEY:MATH  :KEY:TIME_INC
 :KEY:REF  :KEY:TIME_DEC
 :KEY:TrigMODE  :KEY:TIME_Z
 :KEY:TrigMENU  :KEY:TIME_POS_INC
 :KEY:TrigFORCe  :KEY:TIME_POS_DEC
 :KEY:Trig%50  :KEY:TIME_POS_Z