Command Systems RIGOL
Programming Guide for DS1000B Series
Command Format:
:MASK:STOPonoutput {{1|ON}|{0|OFF}}
:MASK:STOPonoutput?
Function:
The command sets the output stop mode of passing test ON or OFF.
Returned Format:
The query returns 1 or 0, respectively indicates ON or OFF.
Example:
:MASK:STOP ON Set the output stop mode of passing test on.
:MASK:STOP? Return 1.
9. :MASK:SAVE
Command Format:
:MASK:SAVE
Function:
The command saves the rule of passing test.
10. :MASK:LOAD
Command Format:
:MASK:LOAD
Function:
The command loads the rule of passing test.
11. :MASK:DOWNload
Command Format:
:MASK:DOWNload <filename>
Function:
To Next Page
Loading...
