Rigol DS1204B - Page 139

Programming Examples RIGOL
Programming Guide for DS1000B Series
3-7
// send the receiving commands
m_combox.GetLBText(m_combox.GetCurSel(),strTemp);
strTemp = strTemp + "\n";
stringTemp = (char *)(LPCTSTR)strTemp;
viPrintf (vi,stringTemp);
// read the result
viScanf (vi, "%t\n", &buf);
// display the results
UpdateData (TRUE);
m_receive = buf;
UpdateData (FALSE);
viClose (vi);
viClose (defaultRM);
9. Save, build and run the project, you will get an EXE file. When the oscilloscope
has been successfully connected with PC, choose a command such as *IDN?
and click “Send and Read”, the oscilloscope will return the result.