Rigol DS1204B Programming Guide

RIGOL Command Systems
Programming Guide for DS1000B Series
2-42
Example:
:TRIG:ALT:LEV 2, SOURB Set the trigger voltage level as 2V.
:TRIG:ALT:LEV? SOURB Return 2.000e000.
7. :TRIGger:ALTernation:EDGE:SLOPe
Command Format:
:TRIGger:ALTernation:EDGE:SLOPe <value>[,<source>]
:TRIGger:ALTernation:EDGE:SLOPe? [<source>]
Function:
The command sets the edge type of edge trigger in current channel as POSitive
(rising edge) or NEGative (falling edge). The <source> may be SOURceA or
SOURceB, and the source A and B are varying with the current alternation
channel.
Returned Format:
The query returns POSITIVE or NEGATIVE.
Example:
:TRIG:ALT:EDGE:SLOP POS, SOURB Set the edge type as rising edge.
:TRIG:ALT:EDGE:SLOP? SOURB Return POSITIVE.
8. :TRIGger:ALTernation:PULSe:MODE
Command Format:
:TRIGger:ALTernation:PULSE:MODE <value>[,<source>]
:TRIGger:ALTernation:PULSe:MODE? [<source>]
Function:
The command sets the trigger condition of pulse trigger. The <value> may be
+GREaterthan, +LESSthan, + EQUal, -GREaterthan, -LESSthan or –EQUal. The
<source> may be SOURceA or SOURceB, and the source A and B are varying
with the current alternation channel.
Returned Format:
The query returns +GREATER THAN or +LESS THAN, +EQUAL, -GREATER THAN,

Rigol DS1204B Specifications

General

Brand	Rigol
Model	DS1204B
Category	Test Equipment
Language	English