Rigol DS7024

RIGOL Chapter 2 Command System
2-120 MSO7000/DS7000 Programming Guide
:Quick Commands
The :Quick commands are used to set and query the relevant parameters for shortcut keys.
Command List:
 :Quick:OPERation
:Quick:OPERation
Syntax
:Quick:OPERation <type>
:Quick:OPERation?
Description
Sets or queries the type of the shortcut keys.
Parameter
Name
Type
Range
Default
<type>
Discrete
{SIMage|SWAVe|SSETup|AMEasure|SRESet}
SIMage
Remarks
SIMage: indicates the screen image.
SWAVe: indicates the waveform saving.
SSETup: indicates the setup saving.
AMEasure: indicates all measurement.
SRESet: indicates statistics reset.
Return
Format
The query returns SIM, SWAV, SSET, AME, or SRES.
Example
:Quick:OPERation SWAVe /*Sets the type of the shortcut key to SWAVe.*/
:Quick:OPERation? /*The query returns SWAV.*/