Need help?Do you have a question about the Rigol HDO1000 Series and is the answer not in the manual?
General| Channels | 2 or 4 |
|---|---|
| Input Voltage Range | ±400 V (DC + AC peak) |
| LAN Port | Yes |
| Sample Rate | 1 GSa/s |
| Trigger Modes | Edge, Pulse, Video, Slope, Runt, Pattern |
| Interfaces | USB Host, USB Device, LAN |
| FFT | Yes |
| Serial Bus Triggering and Decoding | I2C, SPI, CAN, LIN |
| Protocol Decoding | I2C, SPI, UART, CAN, LIN |
| USB Ports | USB Host, USB Device |
| Max Input Voltage | 400 V (DC + AC peak) |
| Vertical Resolution | 8-bit |
| Input Impedance | 1 MΩ ± 2% // 15 pF |
To Next Page
