RIGOL
MSO8000 Quick Guide 5
General Inspection
1． Inspect the packaging
If the packaging has been damaged, do not dispose the damaged
packaging or cushioning materials until the shipment has been checked
for completeness and has passed both electrical and mechanical tests.
The consigner or carrier shall be liable for the damage to the instrument
resulting from shipment. RIGOL would not be responsible for free
maintenance/rework or replacement of the instrument.
2． Inspect the instrument
In case of any mechanical damage, missing parts, or failure in passing the
electrical and mechanical tests, contact your RIGOL sales
representative.
3． Check the accessories
Please check the accessories according to the packing lists. If the
accessories are damaged or incomplete, please contact your RIGOL
sales representative.
Product Overview
MSO8000 series is a medium and high-end mixed signal digital oscilloscope
designed on the basis of the ASIC chip (RIGOL self-owns its intellectual
property right) and UltraVision II technical platform developed by RIGOL.
Integrating 7 independent instruments into one, the MSO8000 series is
equipped with the analog bandwidth of up to 2 GHz, extremely high memory
depth of 500 Mpts, sound waveform display effects, excellent waveform
capture rate, and powerful data analysis functions. Many of its specifications
have reached the top level in the industry. Meanwhile, it supports the real-time
eye diagram measurement and jitter analysis. Its cost-effective features and
high performance make it prominent as the 2 GHz mixed signal digital
oscilloscope.
For descriptions of the front panel, refer to Figure 1 and Table 1; for
descriptions of the rear panel, refer to Figure 2 and Table 2; and for
descriptions of the main interface (display screen), refer to Figure 3 and Table
3.
To Next Page
Loading...
Need help?
General
