8
PRODUCT DESCRIPTION
The welding machine applies the most advanced inversion technology in the world.
The principle of inversion is to transform the power frequency of 50Hz/60Hz into direct current and
invert it into high frequency (50KHz) through high-power device IGBT, then perform voltage-drop and
commutation with the output high-power D.C power supply via Pulse Width Modulation (PWM).
Since the switch power inversion technology is adopted, the weight and volume decrease greatly while
the conversion efficiency increased by more than 30%
The welding machine has the functions of MMA, TIG and MIG. It adopts full digital panel display, which
can realize synergic adjustment of feeding speed and welding voltage as well to regulate the welding
parameters easily.
Our CO
2
gas shielded welding machine is equipped with unique electronic reactor circuit, which can
precisely control the short-circuiting transfer and mixed transfer resulting in better performance than
other machines. Compared with silicon-controlled welding machines and tapped welding, our products
have the following advantages: stable wire feed rate, portable, energy-saving, electromagnetic noise
free. Besides, our products spatter less, easier arc starting, deep welding pool, high duty cycle etc.
This equipment is portable with full function of MMA and plasma cutting having merits of
high-efficiency; power-saving etc .It is especially suitable for family usage and need of different metals
or techniques demand.
Thank you for choosing our products. Please feel free to propose your valuable suggestions; we will
make efforts to perfect our products and service.
WARNING！
The machine can cause radio interference. The operator shall take preventative
measures to mitigate them.
To Next Page
Loading...
