Riland Multipro 200SP - Technical Parameters

9
TECHNICAL PARAMETERS
Type
Item
Multipro 200SP
Power voltage (V)
1 phase 230V

15% 1 phase 115V

15%
Frequency (Hz) 50/60 50/60
Maximum rated input current (A)
32.7 (MIG)
26.7 (TIG)
32.2 (SMAW)
24 (MIG)
17.2 (TIG)
24.5 (SMAW)
No-load voltage(V) 61 61
Output current adjustment (A)
35-200 (MIG)
15-180 (TIG)
15-160 (SMAW)
40-90 (MIG)
15-85 (TIG)
15-75 (SMAW)
Output voltage (V)
15.7-24 (MIG)
10.6-17.2 (TIG)
20.6-26.4 (SMAW)
16-18.5 (MIG)
10.6-13.4 (TIG)
20.6-23 (SMAW)
Duty cycle
25% 30%
Power factor 0.73 0.73
Efficiency (%) 80 80
Type of wire feeder Internal Internal
Wire feed speed (inch/min)
120-440 (3-11m/min) 120-240 (3-6m/min)
Post flow time (s) 3 3
Welding wire diameter (inch) .030"/.040" (0.8/1.0mm) .030" (0.8mm)
Insulation grade H
Housing protection grade IP21
EMC grade B
Welding thickness (inch) More than .030" (0.8mm)
Weight (lb) 28.2 (12.8kg)
Overall dimension (inch) 16.5*8.7*17.3 (420*220*439mm)