Security
Screw
18 19
Install the faceplate.
Place the faceplate on your Ring Doorbell
by slotting it in at the top and clicking it
into place.
Secure the faceplate.
Lastly, use the included screwdriver to insert
and tighten one of the Security Screws.
Your Ring Doorbell is now ready to use.
CAUTION!
If you use the wrong screws to secure the
Ring Doorbell, you could damage the battery
during installation, create a fire hazard, and
be seriously injured.
Optional: Connect to existing doorbell wiresOptional: Connect to existing doorbell wires
To Next Page
Loading...
Need help?
General
