ring 5D22E9 User Manual

Charge the battery.
First, fully charge the battery by plugging
it into a power source using the provided
orange cable.
The small light on top will glow green
once fully charged.
ChargedCharging
2 3
Included installation hardware.
Bag Hardware
A
(5) Short Mounting Screws
To mount Ring Doorbell directly to a wall
(5) Wall Anchors
To install on concrete, stucco, or brick
B
(2) Security Screws
To secure Ring Doorbell after installation
Corner Mount Hardware
C
(5) Short Bracket Screws
To mount Ring Doorbell to the corner mount
(3) Medium Bracket Screws
To mount one angle bracket to a wall
(3) Long Bracket Screws
To mount two angle brackets to a wall
(3) Wall Anchors
To install on concrete, stucco, or brick
Insert the battery.
After charging, insert the battery in the
bottom of your Ring Doorbell until it
clicks into place.

ring 5D22E9 Specifications

General

Brand	ring
Model	5D22E9
Category	Accessories
Language	English