ring 5D22E9 User Manual

8 9
Secure your Ring Doorbell.
Use four of the provided Short Mounting
Screws to secure your Ring Doorbell
directly to the wall.
Install the anchors.
If installing on stucco, brick, or concrete,
mark 4 drill holes using the Ring Doorbell
as a template. Then, use a 1/4” masonry drill
bit to drill holes in your wall, and insert four
of the included wall anchors.
(If you’re installing on wood, skip this step.)

ring 5D22E9 Specifications

General

Brand	ring
Model	5D22E9
Category	Accessories
Language	English