2. Install your
Stick Up Cam Elite.
How to use Stick Up Cam
on a table or shelf:
Choose a location.
Stick Up Cam is happy just about anywhere, indoors or out.
It comes ready to sit on a flat surface like a table or shelf, but
can also be mounted to a wall or ceiling.
Choose a spot where it can provide the view you want,
within reach of the Ethernet port you’ve connected to the
included Ring PoE Adapter.
Table or shelf Mounted on a wall Mounted on a ceiling
Make sure that your Ethernet
cable has been routed
through the hole in the
bottom cover.
Then, slide the cover into
place on your Stick Up
Cam. Secure the cover with
the attached screw, using
the star-shaped end of the
screwdriver bit.
Finally, place Stick Up Cam in
your chosen position. Your
Stick Up Cam is now ready to
use.
98
02_Stick_Up_Cam_Elite_MANUAL_FR-CA_EN.indd 8-9 9/26/19 12:42 PM
To Next Page
Loading...
