ring Stick Up Cam Elite User Manual

How to install Stick Up Cam
on a ceiling:
Drive the screws.
Hold the round part of the base against your ceiling,
rubber-side down. Then mount it with the included screws.
Then, head to page 14 for the final steps.
Rotate the stand above the camera:
The whole stand can rotate on its axis. Before ceiling-
mounting, rotate the stand 180 degrees so the base is
positioned above your Stick Up Cam.
Remove the plastic cover
from the base.
You’ll put the cover back on once
you’ve mounted your
Stick Up Cam.
1312
02_Stick_Up_Cam_Elite_MANUAL_FR-CA_EN.indd 12-13 9/26/19 12:42 PM

ring Stick Up Cam Elite Specifications

General

Video Resolution	1080p HD
Field of View	150° horizontal, 85° vertical
Audio	Two-way talk with noise cancellation
Night Vision	Infrared night vision
Compatibility	Works with Alexa
Power Source	Power over Ethernet (PoE)
Connectivity	Ethernet
Operating Conditions	-5°F to 120°F (-20.5°C to 48.5°C)
Motion Detection	Customizable motion zones
Weather Resistance	Yes
Storage	Cloud storage (Ring Protect plan required)