ring Stick Up Cam - Wall Mounting Instructions - Part 2; Secure Base to Wall; Reattach Base Cover

Push the rubber pad
back into the base.
The rubber pad should sit
between your wall and the
base of your Stick Up Cam.
Drive the screws.
Hold the round part of the
base against your wall
1
rubber-side down. Use the
integrated level to ensure
it1s straight.
Then mount it with the
included screws.
Snap the cover back
onto the base.
Then
1
secure it with the
included base security screw
1
using the star-shaped end of
the screwdriver bit.
..
\
' \
~, \
\
\
\
9