The mobile app will now guide you through the
setup process.
To allow the app to communicate with the
Base Station during setup, you’ll be prompted
by the app to press the Pairing button on the
back of the Base Station until the blue ring
begins spinning.
The first time your Base Station connects
to the internet, it will automatically begin
a software update, which may take a few
minutes. The Base Station LED light should
show a blue ring with yellow spinning
around. When it’s complete, the LED will
be solid blue.
Once your Base Station is set up, the LED light
ring will use colour to tell you the status. Visit
ring.com/alarm-faq for an explanation of Base
Station LED light patterns.
Follow the app to continue the setup process.
Blue Spinning
Ready to pair
Blue Solid
Pairing successful
Blue Flashing
Pairing failed
White Climbing
Connecting to Wi-Fi
White Solid
Connected to
Wi-Fi or Ethernet
White Flashing
Wi-Fi network
connection failed
3. Set up your Alarm Base Station.
LED patterns during pairing
LED patterns connecting to internet
6
To Next Page
Loading...
