How to Arm and Disarm your Ring Alarm:
Using the Keypad, enter your personal access code, and then press the
Disarmed, Away, or Home Mode button.
Using the app, simply tap the Mode of your choice.
Disarming will cancel your alarm signal.
If you have Assisted Monitoring, disarming the system during an alarm
cancels the alarm signal sent to the monitoring service. If you disarm
within 60 seconds of the alarm sounding, you may not receive calls
from the monitoring service. In an emergency, you can allow the alarm
to continue sounding without disarming until you’re sure it’s not needed.
Bypassing Sensors
The bypass feature allows you to arm your Alarm and
ignore a Sensor until the next time you arm your Alarm.
It’s most often used when you want to arm your Alarm
and need to leave a window open or ignore a device
issue now and resolve it at a later time.
Using your Keypad: When you try to arm and need to
bypass a Sensor, your Keypad will prompt you “Sensors
require bypass.” The ! icon in the top right corner will
turn on, and the
button will blink. You can press the
button to accept or do nothing to cancel arming.
Using the app: If you try to arm your Alarm and a Sensor
needs to be bypassed, you’ll get a notification.
19
To Next Page
Loading...
