Rinnai 412 User Manual

Rinnai
Convector 412/314
Unflued Room Heater
CUSTOMER’S OPERATING
INFORMATION
AND
INSTALLATION INSTRUCTIONS
This appliance shalt be installed in accordance with:
Manufacturer’s Instructions
Local Gas Fitting Regulations.
Rinnai
GAS SPACE HEATERS
Municipal Building Codes
A.G.A. Installation Code for Gas Burning Equipment.
Any other Relevant Statutory Regulation.
This appliance should be installed, serviced and removed
by an authorised person
R
8

Rinnai 412 Specifications

General

Brand	Rinnai
Model	412
Category	Gas Heater
Language	English

Summary

Customer's Operating Information and Installation Instructions

General Safety and Usage Warnings

Installation Environment and Usage Precautions

Installation Requirements

Room Size and Gas Connection

Ignition Procedure

Safety Devices Explained

Over Heat, Fuse, Flame Failure, and Tilt Safety

Describes overheat switch, fuse, flame failure, and tilt switch safety mechanisms.

Oxygen Depletion Safety Device

Details the safety device that cuts gas supply if oxygen levels drop.

Fault Finding Chart

Specifications

Convector 412 Technical Details

Details specifications for Convector 412, including input, gas control, burner, and power supply.

Convector 314 Technical Details

Details specifications for Convector 314, including input, gas control, burner, and power supply.