Fan Convector Manual 23
The appliance must be inspected annually by a licensed professional. Repairs and maintenance should be
performed by a licensed professional. The licensed professional must verify proper operaon aer servicing.
Regular inspecons, as outlined in this secon, are strongly recommended as means of keeping your heater
operang efficiently and safely. Access to internal parts is from the front of the heater.
Any safety screen or guard removed for servicing an appliance must be replaced prior to operang the heater.
Both air filters should be cleaned monthly during the heang season. Do not wait for filter warning lamp to come
on before cleaning filters. Do not use the heater with the filter warning lamp on or the appliance will overheat.
Dusty filters reduce the air flow through the heater and reduce the heater’s effecveness. The filters while
installed may be cleaned with a vacuum cleaner.
The heater should be inspected and cleaned annually by a professional service person. More frequent cleaning
may be required due to excessive lint from carpeng and/or other materials. It is imperave that the controls,
burners and circulang air passageways of the appliance be kept clean.
RequiredMaintenance
To protect yourself from harm, before performing maintenance:
Turn off the electrical power supply by unplugging the power cord or by turning off the electricity at the
circuit breaker. (The temperature controller does not control the electrical power.)
Turn off the gas at the manual gas valve, usually located immediately below the heater.
WARNING
Keep the appliance area clear and free from combusble materials, gasoline, and other
flammable vapors and liquids.
WARNING
The appliance must be inspected annually by a licensed professional. Repairs and maintenance should be
performed by a licensed professional. The licensed professional must verify proper operaon aer servicing.
Thefollowingmaintenanceitemsarerequiredfortheproperoperaonofyourheater.
To Next Page
Loading...
Need help?
General