EasyManuals Logo

Rinnai FC824 User Manual

Rinnai FC824
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
20 Fan Convector Manual
OperangtheTimer(s)(FC510):
Press the On Timer buon . The On Time indicator will
illuminate and the Combuson indicator will be illumi
nated green to conrm that the heater is awaing for
the Delay “ON” me period to pass before commenc
ing operaon. The Delay On Timer indicator will also
illuminate and the current Delay On Time period will
be displayed on the Digital (Temp / Time) display for
10 seconds. While displayed, the Delay “ON” me can
be adjusted by pressing the Up or Down buons . A
delay me of up to 9½ hours can be set in increments
of 30 minutes and a delay me of up to 24 hours in
increments of 60 minutes. When the programmed
Delay “ON” me period has passed, the heater will
automacally begin operaon.
The Timer feature allows you to delay the start me
of the heater for up to 24 hours.
NOTE
The heater will connue to operate for a period of 60
minutes. On Timer operaon can be cancelled by
pressing either the ON/OFF buon or the O Timer
buon . The delay ‘On’ me last programmed is
stored in the memory and will be the default unl it is
readjusted.
If the On Timer buon is pressed while the heater is
in operaon the On Timer will override manual
operaon.
Operang the On Timer
Operang the O Timer
The O Timer allows you to set a 60 minute delay
before the heater will automacally turn o.
To operate, press the O Timer buon . The O
Timer indicator will illuminate and the Combuson
indicator will be illuminated red to conrm that the
heater will connue operaon unl the Delay ‘o
me period has passed aer which it will stop. The
Delay O me is 60 minutes. When this me has
passed, the heater will automacally stop operaon
and the O Timer indicator will go out.
During O Timer operaon full manual control of the
heater is available.
NOTE
Aer the O Timer operaon is completed, press the
On/O buon twice to restart the heater.
The O Timer and On Timer(s) work independently of
each other. However, if both mers are operang
and the Delay On me period is 30 minutes, the Delay
O Timer will override the Delay On Timer.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rinnai FC824 and is the answer not in the manual?

Rinnai FC824 Specifications

General IconGeneral
BrandRinnai
ModelFC824
CategoryHeater
LanguageEnglish

Related product manuals