What to do if my Rinnai Infinity 26 Touch Water Heater does not attempt to start at all?
If your Rinnai Water Heater does not attempt to start at all, check that the power is on at the unit. Also, ensure that the isolation valves at the unit are open.
What to do if there is power interruption during bath fill with my Rinnai Infinity 26 Touch Water Heater?
If you experience a power interruption during a bath fill and the water will not flow when the power is restored, turn off all hot water taps. Then, press the On/Off button twice.
How to fix a noticeable reduction in water flow in my Rinnai Infinity 26 Touch?
If you notice a reduction in water flow in your Rinnai Water Heater, the inlet water filter may need to be cleaned. It is recommended to schedule a service call.
What to do if power interruption during bath fill with Rinnai Infinity 26 Touch?
If you experience a power interruption during a bath fill and the water doesn't flow when the power is restored with your Rinnai Water Heater, turn off all hot water taps and press the ON/OFF button twice.
What to do if Rinnai Infinity 26 Touch does not attempt to start?
If your Rinnai Water Heater does not attempt to start, check that the power is on at the unit and that the cold water valve at the unit is also on.
General| Model | Infinity 26 Touch |
|---|---|
| Gas Type | Natural Gas or LPG |
| Hot Water Output | 26 L/min |
| Controller Included | Yes |
| Ignition System | Electronic Ignition |
| Temperature Control | Digital |
| Energy Star Certified | Yes |
| Type | Continuous Flow |
| Energy Rating | 6 Star |
| Temperature Range | 37°C to 60°C |
| Warranty (Heat Exchanger) | 12 years |
| Warranty (Parts) | 3 years |
To Next Page