01/18 29
Via the Flexmote remote (option):
5. Press button 3 (Throttle close and HD off).
6. Close the High-pressure valve.
Treat the high-pressure hose carefully:
• Always clean it after use.
• Ensure that no sharp objects are near the hose.
• Ensure that no traffic crosses the hose.
• If the hose has to be repaired, use only the special repair couplings.
5.10 Cleaning a wall, terrace or floor.
Caution!
Before using a spray gun, you must always set the pressure
below the maximum (±the half of the maximum pressure).
• You must do this before you start the machine.
• If the machine is running, the pressure can be increased by turning the
control wheel to his working pressure.
• Never exceed the maximum pressure that is marked on the manome-
ter when using the spray gun.
Before cleaning:
1. Screw the spray gun including in the delivery onto the high-pressure
hose. Fasten it by using the two spanners provided.
2. COMPLETELY unroll the high-pressure hose.
3. Attach the spay lance gun. Secure the quick coupling tightly.
4. Open the HP valve.
To Next Page
Loading...