Rioned flexJET+ - Spray with Spray Lance

01/18 31
Via the Flexmote remote (option):
9. Press short button 2 (HD on).
10. Press long button 2 (Gas open).
5.11 Spray with spray lance
1. Screw the high-pressure regulator wheel upward on the high-pressure
regulator until the required working pressure is reached.
- The adjusted pressure can be read from the pressure gauge on the
machine when the spray gun is open.
2. Aim the lance at the surface.
3. Pull the trigger of the spray gun. Release the trigger and the spraying
stops.
Stop working:
Via de control box:
1. Press button I in (Throttle close).
2. Press button H in (HP off/stop spraying).
1
2
3
4
5
B
F
C
D
A
H
I