Rioned flexJET+ - Radio Remote Control (Flexmote)

01/18 47
1. Start the engine
2. Stop the engine
3. High-pressure pump on (start spraying)
4. High-pressure pump off (stop spraying)
5. Open gas of the engine
6. Close gas of the engine
7. Emergency stop
8. Transmitter on/off
9. Indication light battery
Trouble shooting
• Every system is checked on high quality
before leaving the factory. If any
disturbances would appear, check the part
“trouble shooting”
7.14 Radio remote control (Flexmote)
Purpose: To control the machine remotely.
Key features:
Transmitter activate and hold the “ON” button a half second.
Transmitter deactivation: hold the “OFF” button for half a second.
The emergency stop button is always active, so in panic situations no time is
lost!
Standard keys are not simultaneously activated.
Control transmitter.
Transmitter features:
1. Emergency stop.
2. Push button briefly: HP open.
Long press: More throttle.
3. HP close and throttle close.
4. Transmitter on.
5. Transmitter close.
Check before working with the transmitter if the
emergency stop works well.
Proceed as follows:
1. Insert the 7-pin plug into the contact.
2. Transmitter on (4).
3. Start the engine
4. Transmitter off (1).
The machine has to cut off now.
1
2
3
5
6
8
4
7
9
1
2
3
4
5