01/18 46
• Insert the 7-pin plug into the
contact.
• Switch on control box at
“Radiographic operating” .
• Switch the transmitter on .
• Start the engine by means of button “START”.
•Push the “STOP” button .
The machine has to cut off now
If this is not the case it is not allowed to work with the
transmitter. Contact your supplier.
If the indication on the transmitter starts burning it´s indicates that
the battery must be changed with a new fully loaded battery.
If the battery isn't changed the transmitter switches off in a short time.
Reload empty batteries.
Functions:
To Next Page
Loading...