EasyManua.ls Logo

Rioned flexJET+ - Maintenance Scheme

Rioned flexJET+
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
01/18 56
8.10 Maintenance scheme
Interval
Check oil levels : Every time before use
Cleaning water filter : Every time before use and with strong
pollution.
Cleaning carriage : weekly or with strong pollution.
Service engine : Every 250 working hours or at least once
every six month
Lubricate moving parts : Every 250 working hours or at least once
every six month
Cleaning pressure regulator : Every 250 working hours or at least once
every six month
Wheel nuts : Pull every 5000 km
Wheel nave : After every 10.000 km supply with new
grease
Renew pump oil : Every 1000 working hours or once a
year
Renew oil hydraulic system : Once a year
Decalcify suction valves : Once a year
Decalcify pressure valves : Once a year
Puncture nozzle holes : Every 50 working hours
Replace all parts immediately if there is wastage or defect.

Table of Contents