01/18 61
10 AUXILIARIES
With this machine are some auxiliaries standard delivered.:
1. Two fork spanners ( Illustration 10.1) for mount and dismount the
spray gun.
2. Two nozzles ( Illustration 10.2).
These nozzles are mounted at the end of the high-pressure hose. Con-
nect always the O-ring on the screw thread of the high-pressure hose.
Than screw the “nozzle open” on the high-pressure hose. After the un-
glogging change “nozzle open” with “nozzle blind” to rinse.
Illustration 10.1
Fork spanners.
Illustration 10.2
Nozzle open and
blind.
To Next Page
Loading...