Introduction
Trainer 40 Instructions
Thank you for purchasing the Trainer 40,
and welcome to the dynamic world of
model aviation! Perhaps more so than any
other branch of model Operation, model
aircraft present a unique set of challenges
Trainer 40 will help you to
master these, enabling you to
become a proficient and safe pilot.
Your Trainer 40 instruction manual
will take you step by step through
the building, installation and
Operation of every aspect
of a modern and
sophisticated
training aircraft.
Following a logical building sequence,
illustrated with both photographs
and detailed descriptions,
the Trainer 40 will
assemble with
ease and in
the minimum
of time.
To help you choose the most
suitable accessories for your model, a
complete list of recommended hardware is
included together with basic tool and
adhesive requirements.
Completed, your Trainer 40 will equip you
with the best available airframe with which
to master the challenge of model flying. It is
strongly recommended that a local club is
joined whose members can check the
model over, carry out the initial test and
trimming flights and then teach the fledgling
pilot the intricacies of model flying, all within
a safe and controlled environment.
Once solo and competent, the Student will
be able to explore the more advanced flying
capabilities of the Trainer 40, such as loops,
rolls and stall turns. These, and other
manoeuvres, are possible from the same
basic airframe and will equip the Student
with an understanding of all
things aerodynamic.
To Next Page
Loading...
