Risco LightSYS2 - System Tones

Mastering Your System
Page 18
System Tones
In addition to the visual indications provided by your keypad(s), your system is designed
to produce audible annunciation after certain events. Depending on the circumstance, such
sounds may be made by your system's keypad(s) or sounders (for example, a sounder or
bell).
Note:
If defined by your engineer, internal bell annunciation can be generated to
accompany any of the keypad sounds.
Event Keypad Sound Internal Bell External Sounder
Intrusion
Alarm
Rapid beeping Rapid beeping Rapid beeping
Fire Alarm
Rapid beeping Rapid beeping YES (staggered)
Keypad Police
Emergency
No sound (1) No sound (1) No Sound (1)
Keypad
Emergency /
Medical
A momentary chirp No sound No sound
Setting or
Unsetting
No Sound System is set:
1 chirp
System is unset:
2 chirps (keyfob)
Unset after alarm:
4 chirps (Keyfob)
System is set:
1 chirp
Confirm
Operation
A one-second tone, if
completed correctly
No sound No sound
Reject
Operation
Three rapid error
beeps, if incorrect (2,3)
No sound No sound
Entry Delay
Countdown
Slowly repeating tones
until the entry delay
time period expires (2)
No sound No sound
Exit Delay
Countdown
Slowly repeating tones
until the exit delay
time period expires (2)
No sound No sound
Chime Sound
2 second buzzer beep (4)
No sound No sound