Risco LightSYS2 - Page 32

User Functions and Settings
Page 32
Setting / Changing User Codes
The user assigned the grand master authority level can change all user codes but cannot
view the digits in the user code fields. Users with other authority levels can only change
their own codes. The system must be unset in order to set or change user codes.
Note: User codes can also be defined from the web application
To set/change a user code:
1. Press and enter your code followed by .
2. Using the arrow keys, scroll to the option Codes/Tags and press
.
3. Scroll to Define and press
.
4. Select the user index number and press
.
5. Select Edit Code and press
.
Note:
In the LightSYS2 system, the User Index number range is from 00 to 15.
(00=Grand master)
6. Enter the new code followed by .
If successful, a single confirmation beep is sounded; if not, three quick error beeps are
sounded
7. Repeat the above steps for additional codes until you have completed your list